GT35 Turbocharger .82 A/R 56 Trim. Billet aluminum compressor backing plate. Anti-surge compressor housing. Good for several higher HP 4/6 cylinder applications. Honda Civic, Nissan S13, S14, 240SX, Mitsubishi Eclipse, Mustang etc. It can produce up to 500 HP depending on your combination. Journal bearing. See full specifications under "Technical Specs". 6 month warranty. Typical installation precautions and guidelines can be found HERE.
Horsepower Level = 400-500HP @ 6-25psi
Turbo Style = GT3582
Compressor A/R = .70
Compressor Inducer Diameter = 61.40mm
Compressor Exducer Diameter = 82mm
Compressor Trim = 56
Exhaust Inducer Diameter = 68mm
Exhaust Exducer Diameter = 62.30mm
Exhaust Trim = 84
Compressor Inlet OD = 4"
Compressor Outlet OD = 2.50"
Turbine Inlet Flange Style = T3 (Vibrant #1400 or #14000)
Turbine Outlet Flange Style = 4-bolt (Vibrant #1438 or 14380)
Turbine A/R = .82
Cooling = Water/Oil
Water Cooling Threads (in/out) = 14mmx1.50 (PW #92106M14-15 -6AN)
Oil Feed Thread = 7/16"x24 Inverted Flare (Aeroquip #FCM2930 -4AN)
Oil Drain = (PW #83230 -10AN or Vibrant #2889 1/2" NPT female)
Oil Drain Bolt Threads = 8mmx1.25
Note: Turbochargers are non-returnable.